Goulds 2ED51E4BA, Submersible Effluent Pump, 2ED Series, 1 HP, 460 Volts, 3 Phase, 2" NPT Discharge, 105 GPM Maximum, 78 ft. Maximum Head, Cast Iron, 20 ft. Cord, Manual

Goulds 2ED Series Submersible Effluent Pump Dual Seal with Sensor ProbeThis is a submersible effluent pump designed for most effluent systems. This pump has a maximum spherical solids handling capability of up to 3/4 of an inch and is designed for continuous use. FeaturesDual mechanical sealsLower: SILICON CARBIDE VS. SILICON CARBIDE sealing faces. Stainless steel metal parts, BUNA-N elastomersUpper: CARBON VS. CERAMIC sealing faces. Stainless steel metal parts, BUNA-N elastomers Seal sensor probe is located in oil-filled chamber. If pump should begin to leak past lower seal it indicates to pump control panel a fault has occurred. Requires optional Seal Fail Circuit in the control panelCorrosion resistant, stainless steel shaft. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation300 series stainless steel fastenersFully submerged in high-grade turbine oil for lubrication and efficient heat transferClass F insulation motorPump ratings are within the motor manufacturer's recommended working limits, can be operated continuously without damage when fully submergedUpper and lower heavy duty ball bearing constructionPower and control cable are severe duty rated, oil and water resistant. 20 feet standard with optional lengths availableO-ring assures positive sealing against contaminants and oil leakageApplicationsFarmsTrailer courtsEffluent systemsMotelsSchoolsHospitalsIndustry

• Dual mechanical seals. 300 series stainless steel fasteners
• Lower: SILICON CARBIDE VS. SILICON CARBIDE sealing faces. Stainless steel metal parts, BUNA-N elastomers
• Upper: CARBON VS. CERAMIC sealing faces. Stainless steel metal parts, BUNA-N elastomers
• Seal sensor probe is located in oil-filled chamber. If pump should begin to leak past lower seal it indicates to pump control panel a fault has occurred. Requires optional Seal Fail Circuit in the control panel
• Corrosion resistant, stainless steel shaft. Threaded design. Locknut on all models to guard against component damage on accidental reverse rotation