Arducam CMOS MT9J001 1/2.3" 10MP Monochrome Camera Module
Produktdetails
| Artikelnummer | 234967076 | Erscheinungsdatum | 2026/07/02 | Listenpreis | €25.64 | Modellnummer | 234967076 | ||
|---|---|---|---|---|---|---|---|---|---|
| Kategorie | |||||||||
- M12 mount LS-18023 lens
- 10MP (3856 x 2764) CMOS monochrome shutter with reset release camera module MT9J001
- 1/2.3" optical format / 1.67 x 1.67 um Pixel size
- 0.31V/lux-sec responsivity / Resolution: 7.5fps
- Parallel camera interface
The Arducam CMOS MT9J001 1/2.3" 10MP Monochrome Camera Module features the Aptina’s breakthrough low-noise CMOS imaging technology that achieves near-CCD image quality (based on signal-to-noise ratio and low-light sensitivity) while maintaining the inherent size, cost, and integration advantages of CMOS. It incorporates the monochrome version of the MT9J001 sensor on board.
The MT9J001 is a progressive-scan sensor that generates a stream of pixel data at a constant frame rate. It uses an on-chip, phase-locked loop (PLL) to generate all internal clocks from a single master input clock running between 6 and 48 MHz. The maximum output pixel rate is 80 Mp/s, corresponding to a pixel clock rate of 80 MHz.
Korrektur der Produktinformationen
Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.
Korrekturanfrage